4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY AND OPERATION
ASSEMBLY
Your lamp is supplied in two parts;-
• The lamp assembly with adjustable arms,
• The clamp/holder.
1. Fit a lightbulb (E27 type, - not supplied) to the lamp.
2. Slide the lamp assembly spigot into the holder.
SETTING UP
The clamp can be mounted on
surfaces with varying angles and
such variations can be
accommodated by the adjustment
of the lamp assembly.
The lamp may be rotated freely in the
holder and the arms set at any angle
by slackening the pinch bolt,
adjusting the angle & re-tightening.
Do not over tighten the pinch bolt.
When correctly tightened, the lamp
should be capable of maintaining
stability in any position.
CARE & MAINTENANCE
The lamp requires no maintenance other than cleaning the lens. Liquid glass
cleaner may be used to clean the lens, used sparingly and with a soft dry
cloth. Do not allow the electrical connections to get wet.
IMPORTANT: Always switch the lamp OFF and unplug from the power supply
before cleaning the lens.
1. When not in use, switch off & unplug from the power supply.
2. This product should be stored in a secure, dry place, out of the reach of
children. DO NOT leave it exposed to the elements and avoid direct
sunlight, direct heat, rain/moisture etc.
Содержание SAM75B
Страница 8: ......
