4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY AND OPERATION
ASSEMBLY
Your lamp is supplied in three parts;-
• The lamp assembly with
adjustable arms,
• The mounting clamp/holder
• The lampshade.
1. Push the lampshade onto the
lamp body, using the three
dimpled pressings and then twist
to lock it in place.
2. Fit the lamp assembly spigot into the holder.
3. Fit the lightbulb (E27 type, 40W max, - not supplied) to the lamp.
SETTING UP
The mounting clamp can be
mounted on rigid surfaces with
varying angles and such variations
can be accommodated by the
angulation of the lamp assembly.
The lamp may be rotated freely in the
holder and the arms set at any angle.
Slacken the pinch bolt to adjust the
angle of the lamp before re-
tightening.
Do not over tighten the pinch bolt.
When correctly tightened, the lamp
should be capable of maintaining
stability in any position.
CARE & STORAGE
1. When not in use, switch off &
unplug from the power supply.
2. This product should be stored in a
secure, dry place, out of the
reach of children. DO NOT leave it exposed to the elements and avoid
direct sunlight, direct heat, rain/moisture etc.
Содержание SAL100B
Страница 8: ......
