Clarke PW2, Инструкция по эксплуатации и обслуживанию

Страница: 3 / 24

3
GENERAL SAFETY RULES
As with all machinery, there are certain hazards involved with its
operation and use. Exercising caution will reduce the risk of
personal injury.
1 ALWAYS observe all safety precautions for the handling of fuel.
2. ALWAYS thoroughly familiarise yourself with this unit & its operation, and follow all
instructions in this manual.
3. ALWAYS ensure that the pump is properly positioned where necessary to prevent it from
moving during operation, and that the immediate area surrounding the pump is kept clear.
4. ALWAYS ensure the unit cannot be started inadvertently by using the ON/OFF switch
whenever carrying out maintenance or making adjustments.
5. ALWAYS use the strainer connected to the suction hose, to prevent stones and other solids
from being drawn up, which could cause severe damage to the pump.
6. ALWAYS keep the machine itself dry and well clear of water discharge
7. ALWAYS use only replacement parts supplied by the manufacturer. The use of non-standard
parts could be hazardous.
8. ALWAYS use at least 1ft (300mm) of flexible hose to make plumbing connections to the
pump. Rigid piping may put stress on the pump, causing damage. If rigid piping must be
used, it should be supported so as to eliminate stress on the pump.
9. NEVER refuel the engine whilst it is running, and allow the engine to cool sufficiently before
refuelling.
10. NEVER use for pumping petrol (or other flammable liquids), or corrosive chemicals. These
pumps are designed to pump WATER ONLY .
11. NEVER operate an engine driven unit in an explosive atmosphere, near combustible
materials, or where there is insufficient ventilation.
12. NEVER allow children to use this machine.
13. NEVER run the pump dry. Always fill the pump with water before starting.
14. NEVER attempt any major repairs to this machine unless you are properly qualified.
15. NEVER direct the discharge flow towards another person.
16. NEVER over-tighten drain or filler plugs. Excessive force may damage the threads or the
pump body.
17. NEVER direct the water discharge towards electrical wiring or equipment.