10. Do not attempt any repairs to this machine unless you are properly qualified.
If you experience a problem, we suggest that you first contact your local
dealer or otherwise Clarke International, Service Division (please see further
details under Guarantee section).
11. Do not operate this power washer at very low temperatures where the water
is liable to freeze.
12. Do not operate this power washer whilst standing on a ladder. Always ensure
you take a sure footed position.
13. We recommend the use of safety goggles, particularly where there may be
loose particles of stone or grit caught up in the high pressure spray.
ASSEMBLY
After removing the contents of the box, fit the top handle (Item 5) to the existing
frame (Item 15) using the two black bolts and handwheels (Item 3) provided.
Also supplied separately you will find:
A) A two piece hose connector with washer for the inlet water supply.
B) A clear polythene detergent pick-up tube.
C) A detergent filter.
WATER SUPPLY
There are different ways in which water can be supplied to this power washer.
In each case connection can be made using an appropriate length of 1/2” bore
braided water hose which can be obtained from your local Hardware/DIY Store
or Garden Centre. They should also be able to supply whatever you might need
to make connection to the water supply source.
The water inlet hose connector on this machine is supplied as standard complete
with a hose retaining clip.
POSITIVE FEED
The best way to supply water to this power washer is by means of:
A) Connection to a pressurised mains supply OR
B) Connection to a static supply such as a tank or other container situated
above the level of the power washer so that the water flows in by means of
gravity.
SUCTION FEED
This power washer is also capable of drawing water from a static supply at lower
level providing that the inlet connection to the machine (Item 10) is no more than
0.5 metres above water level.
3