background image

4

SAFETY PRECAUTIONS

This Patio Heater is designed for OUTDOOR USE ONLY

Patio Heaters MUST NOT be used in homes, offices and similar environments.

NEVER MAKE ANY MODIFICATIONS to the heater.

Patio Heaters can be installed in rooms with a volume of

 AT LEAST 200 M

3

, PER HEATER

MAKE SURE that there is no flammable material within 2M of the heater

MAKE SURE that all other materials are more than 1M from the heater

PAY ATTENTION to whatever may be above the heater because:

At 30 cm from the hood the temperature is 50°C

At 60 cm from the hood the temperature is 40°C

At 90 cm from the hood the temperature is 30°C

Any flammable coating must be at least 1M from the reflecting hood of the heater.

DO NOT TOUCH any part of the heater above the stack ,it could be very hot, enough to cause
serious burns.

ALWAYS wait at least one hour after switching off the heater completely before touching the
parts above the start button.

NEVER cover the heater .

DO NOT START the heater if it is not completely assembled.

To stabilise the heater,  ALWAYS use cylinders with an empty weight of not less than 11 kg.

DO NOT USE the heater when there are strong winds, or secure its base  to prevent the possibility
of it  tipping over.

NEVER move the heater when it is lit.

NEVER move the heater just after switching off, but wait until it is cool.

REMOVE the gas cylinder from its compartment when the heater is not in use for long periods.

DO NOT replace the rubber hose (8) with one greater than 1M in length.

ALWAYS close the gas cylinder valve after use.

ALWAYS keep a constant check on the heater when it is operating.

DO NOT KEEP gas cylinder in cellars, basements, stairwells, corridors, underground passages, etc.

DO NOT EXPOSE the gas cylinder to the sun: if this is necessary, it must be covered.

KEEP the cylinder away from sources of heat.

Содержание PHT3













Отзывы: