6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SELECTING WELD OR GRIND SETTING
The headshield has a ‘GRIND’ setting,
on the selector knob. When set to
‘GRIND’ the auto darkening function
is disabled. The headshield then
provides eye and face protection for
sparks and airborne particles created
during grinding operations.
SELECTING THE SHADE SETTING
On striking an arc, the light created will activate the solar cell and the window
will automatically darken to a preset level. The lithium batteries will provide the
necessary energy to operate the headshield when there is no arc light.
You can adjust this shade level using the shade adjustment knob on the side of
the headshield, corresponding to the type of welding process.
• There are five levels available; 9, 10, 11, 12 and 13. Check the table
on page 7 to determine which you should select.
1. Set the helmet to WELD mode
using the switch on the left side of
the headshield.
2. Turn the shade selector to the
required setting.
• During the welding operation
the lens will automatically
darken to the pre-set shade.
On removal of the arc, the lens
will return to the light state.
WARNING: IT IS ESSENTIAL THAT AFTER USING THE HEADSHIELD IN
GRINDING MODE, IT SHOULD BE RETURNED TO THE WELD SETTING BEFORE
WELDING. FAILURE TO DO THIS COULD LEAD TO EYE INJURY. MAKE A
HABIT OF RETURNING THE SWITCH TO THE WELD SETTING.
WARNING: DO NOT USE FOR WELDING OUTSIDE THE RANGE OF DIN 9-13.
INJURY TO THE EYES & LOSS OF EYESIGHT MAY BE CAUSED. MAKE SURE
THAT WELDING MODE IS SELECTED BEFORE STRIKING AN ARC.
Содержание PG4
Страница 12: ......
