Clarke LOGBUSTER 10, Инструкция по эксплуатации и техническому обслуживанию, Страница: 6 / 11

6
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
BEFORE USE
SETUP
1. Place the log splitter on flat, level
ground and swing the stand into
position.
• Make sure that the log splitter is
stable.
PREPARING THE LOGS
1. Cut the logs to between 100-400 mm long to fit into the log splitter. the logs
must not exceed 200 mm in diameter.
2. Slide the pusher up with your hand
and place a log on the log guide
plate against the splitting wedge.
3. Lower the pusher against the top
of the log you want to split.
• Always split the logs in the
direction of the grain.
• Do not place the log across the
logbuster for splitting. It is
dangerous and can damage
the log splitter.
• Do not try to split two logs at
the same time. One of them
could fly up and hit you.