4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
PREPARING THE LOG BUSTER
1. Remove the 4 nuts that secure the
front foot of the log buster and
remove the foot.
2. Remove the wheel hub using a flat
screwdriver.
3. Remove the circlip and the wheel.
• The wheels, circlips and hubs will
be attached to the log buster
frame later.
4. Look at the wheel mount / pump
cover assembly on the logbuster.
• If there is a hole as shown go to
step 9.
• if not you will need to purchase
a replacement wheel mount /
pump assembly cover from your
Clarke dealer part number
3402044 and go to step 5
5. To replace the wheel mount /
pump cover assembly. remove
the safety handle and the nut next
to it (shown on the right) from the
log buster.
LB7S Log Buster Stand.fm Page 4 Friday, September 16, 2011 4:25 PM
