Clarke KSP16, Инструкция по эксплуатации и обслуживанию

Страница: 5 / 12

5
ASSEMBLY
1. Push the lance into the trigger
assembly and secure with the
screw cap.
2. Attach one of the nozzles
provided to the other end of the
lance and secure with the screw
cap.
• A telescopic brass lance is also
available with a choice of
nozzles as listed on page 7.
3. Connect the hose to the pump
outlet securing it with a screw
connector.
4. Attach the shoulder strap by
engaging the hooks into the
keyholes in the base of the
container.
5. Pass the strap through the slot in
the top of the container and lock
in position with a strap retaining
clip.
6. The straps can be adjusted so as
to correctly position the sprayer
on the operators back, taking
care that the straps are not
twisted.
7. To tighten, hold the strap buckle
with one hand and pull the
handle downward with the other
hand.
8. To loosen, tilt the buckle up with
one hand and pull the strap
downward with the other hand.
Strap Retaining Clip
Buckle
Handle
Screw Cap
Connect Collet Seal
Trigger
Assembly
Lance
Hose Clip
Hose