Clarke Jumpstart 910 Скачать руководство пользователя страница 3

- 3 -

Thank you for purchasing this Clarke Jumpstart. Before using please read these instructions.
This is for your own safety and that of others around you, and to help you achieve long and
trouble free service from the Jumpstart unit.

GUARANTEE

This product is guaranteed against faults in manufacture for 12 months from purchase date.
Keep your receipt as proof of purchase. This guarantee is invalid if the product has been
abused or tampered with in any way, or not used for the purpose for which it is intended. The
reason for return must be clearly stated. This guarantee does not affect your statutory rights.

SAFETY PRECAUTIONS

NEVER 

allow the negative and positive leads, on this unit, to touch or to touch the

same metal object.

Although the Jumpstart is water resistant and may be used outdoors, 

DO NOT

 leave it

exposed to the elements. Avoid direct sunlight, direct heat, rain/moisture etc.

The Jumpstart is designed for use with 12V systems 

ONLY

.

DO NOT

 operate the Jumpstart if the case or any of the cables are damaged. Consult

your Clarke dealer for repair or replacement of the parts.

To prevent battery overheating and consequent damage, 

DO NOT

 exceed our

recommendations for jump starting.

The Jumpstart is 

NOT 

designed to be used as a replacement for a vehicle battery.

DO NOT

 attempt to BOOST CHARGE the Jumpstarts’ sealed battery.

DO NOT

 allow the battery, at any time, to become completely discharged.

NEVER OPERATE THE AIR COMPRESSOR FOR MORE THAN 10 MINUTES.

Wait a further 10

minutes (minimum) before restarting

When connecting the Jumpstart leads to a battery, 

ALWAYS

 connect the RED, (positive,

+ve) output conductor to the 

UNEARTHED

 battery terminal 

FIRST

, then connect the

BLACK, (negative, -ve) conductor to the chassis or suitable engine bolt, well away
from the battery and fuel line.

ALWAYS

 ensure the vehicle battery posts and battery clamps are perfectly clean before use.

ALWAYS 

ensure the area is well ventilated When jumpstarting.

ALWAYS 

wear suitable protective clothing and eye protection when working with lead

acid batteries.

WARNING!  It is possible that some electronic equipment could be damaged by
jump starting.  ALWAYS check with the manufacturers handbook to determine
whether or not precautions should be taken.

FEATURES AND USE

The Jumpstart 910 is a rechargeable 12 Volt power supply, ideal for starting  vehicles in the event of
a flat battery. The Jumpstart may also be used to power 12V appliances, such as Mobile Phones,
Radios, Electric Coolers etc. Additionally a battery powered air compressor is available to inflate
tyres, air beds, footballs etc, and a built in lamp may be used as a stand alone light source.

Содержание Jumpstart 910








Отзывы: