Clarke Jumpstart 4000 Скачать руководство пользователя страница 4

Safety Precautions

NEVER 

allow the negative and positive leads, on this unit, to touch or to touch the

same metal object.

Although the Jumpstart is water resistant and may be used outdoors, DO NOT leave it
exposed to the elements. Avoid direct sunlight, direct heat, rain/moisture etc.

The Jumpstart is designed for use with 12V systems ONLY.

Do not operate the Jumpstart if any of the cables are damaged. Consult your Clarke
dealer for repair or replacement of the parts.

Do not operate the Jumpstart if the case is damaged. Consult your Clarke dealer or a
qualified person for inspection and repair.

Ensure the vehicle battery posts and battery clamps are perfectly clean before use.

When connecting the Jumpstart leads to a battery, ensure the ON/OFF switch is OFF,
and 

ALWAYS

 connect the RED, (positive,  +ve) output conductor to the 

UNEARTHED

battery terminal 

FIRST

, then connect the BLACK, (negative, -ve) conductor to the chassis

or suitable engine bolt, well away from  the battery and fuel line.

To prevent battery overheating and consequent damage, do not exceed our
recommendations for jump starting.

When jumpstarting ensure the area is well ventilated.

ALWAYS wear suitable protective clothing and eye protection when working with lead
acid batteries.

The Jumpstart is NOT designed to be used as a replacement for a vehicle battery.

DO NOT attempt to BOOST CHARGE the Jumpstarts’ sealed battery.

DO NOT allow the battery, at any time, to become completely discharged.

WARNING!  It is possible that some electronic equipment could be damaged by
jump starting.  ALWAYS check with the manufacturers handbook to determine

Specifications

Model Number ......................................................................... Jumpstart 4000

Part Number ............................................................................. 6240030

Battery Type .............................................................................. Sealed, Lead Acid,

.................................................................................................... Rechargeable,

.................................................................................................... Maintenance Free

.................................................................................................... 12V DC

.................................................................................................... 38 AH

Voltage Output ........................................................................ 12 Volts DC

- 4 -

Содержание Jumpstart 4000








Отзывы: