Clarke JETSTAR 1950, Инструкция по эксплуатации и техническому обслуживанию, Страница: 10 / 16

10
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
APPLYING CHEMICALS AND CLEANING AGENTS
To improve the cleaning performance, you can introduce chemical cleaning
agents (detergents) to the water jet using the detergent tank. This is
particularly useful when washing cars, greasy engine parts, or removing oil
spots on concrete etc.
To prepare for detergent application:
1. Remove the detergent filler cap
and fill the tank with detergent.
• Only use detergents
recommended for use with
pressure washers such as
CLARKE Traffic Film Remover for
car cleaning, patio cleaning
etc., or CLARKE Wash & Wax,
both available from your
CLARKE dealer.
2. Replace the cap.
3. Slide the nozzle forwards to low
pressure.
4. Use the pressure washer as
normal.
CAUTION: IF YOUR EYES COME INTO CONTACT WITH ANY CLEANING
FLUIDS, RINSE THEM IMMEDIATELY WITH PLENTY OF FRESH CLEAN WATER
AND SEEK MEDICAL ADVICE IF REQUIRED.
DESCRIPTION SIZE PART NUMBER
Car Wash & Wax Shampoo 5 Litre 3050815
Concentrated Traffic Film Remover 5 Litre 3050821
Concentrated Traffic Film Remover 25 Litre 3050820
Ready To Use Traffic Film Remover 5 Litre 3050818
Ready To Use Traffic Film Remover 25 Litre 3050819