Clarke IMAGE 14 120V, Руководство оператора

Страница: 11 / 29

MAINTENANCE (cont)
How To Attach The Auxiliary Floor Tool
To attach the auxiliary floor tool, follow this proce-
dure:
1. Remove the vacuum hose from the recovery
tank.
2. Connect the auxiliary floor tool vacuum hose to
the recovery tank and to the auxiliary tool.
3. Move and hold the brush height lever (figure 5)
away from the auxillary connection. Make
connection and release brush height lever (will
rest against connection). See figure 5a.
4. Connect the solution hose to the machine and
to the floor tool.
5. Turn solution valve to accessory position.
6. Turn the vacuum and pump switch "ON".
7. Operate the optional cleaning tool as normal.
8. When finished cleaning with the optional floor
tool, turn the switches "OFF".
NOTE: Auxiliary floor tools recommended for this
machine:
19209A - RM4 (Upholstery)
19212A - RM9 (9" Floor Wand)
785401 - RM10 (10" Floor Wand)
59220A - Plastic Hand Tool 4" (Upholstery)
NOTE: For maintenance of the optional floor tools,
read the manual supplied with the tools.
After Each Use Of The Machine:
1. To prevent damage to valves and jets, flush one
gallon of clean water
through the solution system and the tools.
2. Disconnect the power cord from the outlet and wrap
around the handle.
3. Drain the recovery tank.
4. Rinse out the recovery tank.
5. Use a dry cloth to wipe both tanks and tools, in-
side and out.
6. Inspect and clean the screen filter in the solution
tank.
7. To prevent clogged jets due to alkaline buildup, the
spray system should be flushed at least twice a
month with either a white vinegar solution
(one quart vinegar to one gallon of hot water) or an
anti-browning solution (mixed as directed).
8. Remove any lint on the vacuum intake screen. The
screen is located under the recovery tank and on
the rear of the machine.
Figure 5
Figure 5a
Page 10
Clarke
®
Operator's Manual - Image 14