Clarke IG3500F Скачать руководство пользователя страница 3

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GENERAL SAFETY RULES 

WORK AREA 

Always use in a well ventilated area

• Always position the exhaust outlet away from people.

• Never use indoors or in a confined space.

• Read these safety instructions before using the equipment. 

• Keep children away from the generator.

POSITIONING THE GENERATOR

1.

Always

 

leave a least a 1m gap between the generator and any 

surrounding building or structures.

2.

Always

 ensure the generator is on a solid, flat surface.

3.

Always

 ensure the surrounding area is free from any material that could 

burn or be damaged by heat.

4.

Never

 move or tilt the generator whilst it is switched on.

FIRE PREVENTION

1.

Always

 

switch the engine OFF when refuelling.

2.

Always

 refuel away from any source of heat.

3.

Always

 refuel in a well ventilated area.

4. Only use standard unleaded petrol.

5.

Never

 smoke whilst refuelling and avoid smoking or using a naked flame 

near the generator.

6.

Never

 start the engine if there is spilled fuel. Any spillage must be wiped 

clean and the generator allowed to dry before attempting to start the 
engine.

WARNING: EXHAUST FUMES CAN BE EXTREMELY DANGEROUS IF INHALED

Содержание IG3500F





























Отзывы: