Clarke IG2200, Инструкция по эксплуатации и техническому обслуживанию

Страница: 22 / 28

22
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The generator fails
to start Engine switch is off Set the engine switch to ‘on’
Not enough oil in the
generator Add more oil, See page 10
No fuel Add more fuel, See page 11
Spark plug not working
correctly Change the spark plug, See
page 20
The generator fails
to generate
electricity The device you are trying to
power is faulty Make sure the device you want to
power is working properly
The overload indicator is on Remove the appliance
immediately, do not connect any
appliance that requires more than
2.2 KVA.
(DC supply only) The DC
Overload protector has
activated. Press the reset button. See page 16
The generator is
difficult to start The air filter is dirty Clean the air filter. See page 19
If this does not solve your problem, please contact the Clarke service
department. see below.
PARTS AND SERVICING
For Parts & Servicing, please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: Parts@clarkeinternational.com
SERVICE: Service@clarkeinternational.com