CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
-2-
Assembly
Tools Required: 2 x 10mm spanners
Stabiliser bars x 2, complete with rubber feet (
Fig. 1a
) are removed for packing and transport
purposes only, both stabilisers
must
be fitted before attempting to use the ladder. To assemble
the ladder, refer to fitting instruction label on stabiliser bars.
Loosely fit all 4 bolts allowing the stabiliser to move slightly from side to side, centralise the
stabiliser and tighten locknuts,
DO NOT
overtighten, (the bolt thread should just be visible,
see Fig. 1b).
NOTE: all 8 bolts must be used to secure stabiliser bars to the ladder (4 in each stabiliser).
DO NOT overtighten the bolts, as doing so will crush the aluminium sections, and possibly
render the ladder unserviceable.
Replacement rubber feet are available from your nearest Clarke dealer.
Part number: JR20001.
Approx 1 full thread
protruding through the
locknut
Fig. 1b
Please note that the details and specifications contained herein, are correct at the time of going to print. However,
CLARKE International reserve the right to change specifications at any time without prior notice.
Fig. 1b
Fig. 1a
Stabilisers
Fitting Instructions
Fittings
