8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONTINUOUS DRAINING
This function enables continuous dehumidifying without having to empty the
water tank.
PREPARATION FOR CONTINUOUS DRAINING:
1. Remove the water tank.
2. Make the hose opening.
• To make the opening, prise the
cover for the drain hose away
using a screwdriver.
3. Fit the drainage pipe adapter
supplied into position shown on
the right.
4. Put the drain hose (not supplied)
through the hose opening and
securely fit the hose to the
drainage pipe adapter.
• The hose should have an
internal diameter of 15mm and
an outer diameter of less than
20mm.
• Make sure that the drain hose always runs downhill away from the
dehumidifier.
5. Replace the water tank.
• The unit will not operate without the tank in position.
