2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE Pump.
The DFT12 & 24 pumps are designed only for use with diesel, paraffin and light
fuel oils and can be connected to vehicle batteries of either 12 or 24 Volts
respectively. They must not be used with water, petroleum fuels or alcohol, nor
if small solids are known to be in suspension.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
SPECIFICATIONS
Please note that the details and specifications contained herein, are correct
at the time of going to print. However, CLARKE International reserve the right
to change specifications at any time without prior notice.
Fluid Classification / Fluids to be used
Clean (light fuel oil, paraffin & diesel)
Rated Max. Head (suction height)
6 m
Rated Max. Flowrate
40 litres/min (diesel)
Max. Operating Temperature
10-70
o
C
Max Liquid temperature
40
o
C
Duty Cycle
30 mins on/ 30 mins off
Weight
9.0 kg (complete kit)
Inlet & Outlet Hose Diameter
3/4” BSP nominal
Motor Voltage
12V DC (DFT12) or 24VDC (DFT24)
IP Rating
IP54
Reserve polarity protection
Yes
Sound pressure level
65 db LpA
Suction/Delivery Hose Lengths
2 m
Supply Cable lengths
2 m
Содержание DFT12
Страница 12: ......