Clarke CWBP300 Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Water-Butt Pump.

This pump is designed for pumping clean water only, including chlorinated 
water from swimming pools but is not to be used for drinking water or for the 
delivery of foodstuffs.

It is NOT designed for pumping slurry, sludge, mud or heavily polluted water, or 
any water containing chemicals or other acidic contaminants including salt 
water.

SPECIFICATIONS

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the 
obligation to deal with the WEEE in accordance with the WEEE 
regulations in relation to the treatment, recycling & recovery and 
environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general 
household waste. It must be disposed of according to the laws governing 
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal 
facility.

Voltage

230V~50Hz

Rated Power 

400 W

Maximum Head Height

11 m

Maximum Depth

7 m

Maximum Flow

37 l/min with hose connected

Maximum Water Temperature

35

o

C

Maximum Particle Size

0.5 mm

Weight

4.5 kg

Cable Length

10 m

Dimensions (D x W x H) 

180 x 155 x 665 (min)- 853 (max) mm

Outlet Thread Diameter

3/4 “ BSP

Outlet coupling type

3/4 “ BSP ball valve

Содержание CWBP300













Отзывы: