5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FITTING THE FIXED WHEELS
1. Position the wheel as shown.
2. Insert the 1¾” Wheel Axle Bolt
through hole in the outer edge of
the wheel housing, wheel, and
secure to corner using a self
locking nut.
NOTE:
Use care not to overtighten
which would prevent the
wheel from turning.
MEASURE THE FOOTPRINT OF YOUR MACHINE
Take note of the outside
measurements of your machine and
add about 1" to the dimension. (1"
allows clearance for the fasteners).
Keep in mind the base is adjustable in
1" increments.
NOTE:
A table saw is shown in this
example for illustration
purposes only. You can use
your universal mobile base on
any open or closed base
machinery within the
minimum and maximum sizes
as stated in the specifications.
CAUTION: WE RECOMMEND THAT YOU USE THIS UNIVERSAL MOBILE BASE
WITH MACHINES THAT HAVE A LOW CENTRE OF GRAVITY, OTHERWISE IT
CAN BECOME UNSTABLE.
CUMB1 - Universal Mobile Base.fm Page 5 Thursday, March 28, 2013 12:34 PM
