3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4. Line up one of the holes in the Tube Insert (5) with the hole in the top of the
Support Post and locate using the Locking Pin.
5. Finally, screw the Screw Nut clockwise so that the Saddle contacts the load
at a suitable support point...careless positioning could result in damage to
the load. Continue to raise the saddle, but only enough to take the weight
of the load.
MAINTENANCE
The screw thread should be
greased occasionally with a
medium grease. In addition
to a visual inspection before
each use, the stand should
be inspected by a qualified
technician annually to
ensure it is completely safe
for use, with no distortion or
damage of any kind.
Ref No
Description
1
Saddle
2
Screw Rod
3
Screw Nut
4
Bearing
5
Tube Insert
6
Bolt M10 x 25
7
Support Post
8
Leg
9
Lower Strut
10
Handle
11
Locking Pin
12
Bolt M10 x 20
13
Nut M10
14
Flat Washer
15
Connecting Plate
16
Upper Strut
