Clarke CSM5175 Series Скачать руководство пользователя страница 7

7

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GENERAL SAFETY RULES

1. Always maintain equipment in good condition for the best/safest 

performance.

2. Never exceed the maximum load for these shelving units as stated in the 

specification.

3. Never use these units if they are damaged.

4. Always load small, stable items on the top shelves, heavier and bulky items 

should be stored on the lower shelves.

5. Always distribute heavy loads evenly across the shelves.

ENVIRONMENTAL PROTECTION

Do not dispose of old products or damaged parts with general household 
waste. All tools, accessories and packaging no longer required should be 
sorted, taken to a recycling centre and disposed of appropriately.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Содержание CSM5175 Series









Отзывы: