7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
FITTING THE BLADE
1. Twist and hold the Blade holder
open.
2. Insert the blade as far as possible
into the holder with the blade
teeth facing downwards.
3. Release the blade holder to lock
the blade in place.
• Check that the blade is secure
before use.
OPERATION
TO SWITCH ON THE SAW
1. Squeeze the trigger.
• The saw will start.
• The speed can be increased by
increasing the pressure on the
trigger.
TRIGGER LOCK FEATURE.
For continuous cutting at full speed,
squeeze the trigger fully and then
press and release the Lock ON
button, then release the Trigger.
WARNING: BEFORE REMOVING, OR INSTALLING A BLADE, MAKE SURE
THAT THE MAINS PLUG HAS BEEN REMOVED FROM THE MAINS SUPPLY.
CAUTION: THE RETRACTED BLADE LENGTH SHOULD BE LONGER THAN THE
WIDTH OF THE WORKPIECE. IF THE BLADE IS SHORTER, THE TIP WILL JAM IN
THE WORKPIECE DURING CUTTING, POSSIBLY CAUSING INJURY AND
DAMAGING THE BLADE OR WORKPIECE.
CRS350M - Mini Reciprocating saw.fm Page 7 Thursday, November 22, 2012 9:41 AM
