10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SELECTING THE OPERATING MODE
HAMMER ACTION SELECTOR
1. With the drill not operating, set the
hammer action selector to the
required setting.
• Left - Hammer Assisted Drilling
• Right - Drill Only
IMPORTANT: When using the
“hammer action” you only need to
apply light pressure. Too much
pressure will place unnecessary load on the motor. Check the drill bits
regularly, re-sharpen or replace if required.
ROTATION ON/OFF SELECTOR
Some jobs require the chuck to
remain stationary yet still have the
hammer effect, such as chiselling
concrete, plaster etc.
• Set the rotation selector to the
right for “Rotation OFF”.
• Set the rotation selector to the
left for “Rotation ON”.
Mode
Hammer Action selector
Rotation selector
Drill Only
Drill Only
ON
Hammer Drill
Hammer Assisted Drilling
ON
Hammer only (no rotation)
Hammer Assisted Drilling
OFF
