8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY INSTRUCTIONS FOR PLUNGE TYPE SAWS
GUARD FUNCTION
a.
Check the guard for proper closing before each use. Do not operate the
saw if the guard does not move freely and enclose the blade instantly.
Never clamp or tie the guard so that the blade is exposed.
If the saw is
accidentally dropped, the guard may be bent. Check to make sure that
the guard moves freely and does not touch the blade or any other part, in
all angles and depths of cut.
b.
Check the operation of the guard return spring. If the guard and the spring
are not operating properly, they must be serviced before use.
The guard
may operate sluggishly due to damaged parts, gummy deposits, or a build-
up of debris.
c.
Make sure that the base plate of the saw will not shift while performing a
“plunge cut”.
The blade shifting sideways will cause binding and likely kick
back.
d.
Always observe that the guard is covering the blade before placing the saw
down on bench or floor.
An unprotected, coasting blade will cause the saw
to walk backwards, cutting whatever is in its path. Be aware of the time it
takes for the blade to stop after the switch is released.
EXPLANATION OF SYMBOLS & PICTOGRAMS
Read Instruction Manual Before Use
Wear Eye Protection
Wear Gloves
Содержание CPS85
Страница 16: ......
