background image

FEATURES

These fully portable machines incorporate a variable pressure control, together
with a fan or jet spray, and may be used with or without a detergent. Although
these machines were designed to operate using a mains water supply, they will
also work satisfactorily with a supply which is under  positive pressure, i.e. from an
elevated water tank etc.

IMPORTANT:

When using the mains water supply, you must ensure you comply

 with all local bye laws.

GENERAL SAFETY PRECAUTIONS

WARNING:

Water at high pressure can be dangerous and can cause damage to persons or

property if the operator is careless. Never allow anyone to operate this equipment

unless they are thoroughly reliable, and familiar with the safety precautions.

✗✗✗✗✗

NEVER 

direct the spray towards any person or animal.

✗✗✗✗✗

NEVER 

direct the spray towards electrical wiring or equipment.

✗✗✗✗✗

NEVER 

hold your finger over the high pressure nozzle.

✗✗✗✗✗

NEVER 

 allow children to use this machine.

✗✗✗✗✗

NEVER 

 operate the machine with any of the covers removed.

✗✗✗✗✗

NEVER 

 attempt any repairs to this machine unless you are properly qualified.

✗✗✗✗✗

NEVER 

supply any liquid other than water to the water inlet.

✗✗✗✗✗

NEVER 

use the chemical injection facility to introduce solvents, e.g. paint

thinners, petrol, oil etc.

When making a connection directly to the water mains supply you must ensure

that it incorporates a device suitable to prevent liquids syphoning back from
the power washer into the mains pipework.

After the engine has been stopped and the water supply turnedoff, but before

disconnecting any hose or accessory, ALWAYS release any residual pressure
in the system by operating the trigger.

ALWAYS 

keep the machine itself dry and well clear of water spray

When not in use, 

ALWAYS 

disconnect from the water supply, and ensure the

system is completely drained. Store in a cool dry location.

When using the chemical injection facility, use only the chemical cleaning agents

(detergents), that are approved for power washers. CLARKE Traffic Film Remover or
CLARKE Wash and WAX (available from your dealer), is recommended.

4

Содержание Contractor PLS160YB









Отзывы: