8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE DC POWER SUPPLY
SELECT THE VOLTAGE
1. Set the ON/OFF switch to the ON
position.
2. Press the push button repeatly
until the required voltage is shown
in blue on the top of the display.
• Select from 12V, 16V, or 19 V.
CONNECTIONS
1. Insert the yellow tip of the small fly
lead into the power pack.
2. Fit the required connector from
the selection to the other end of
the fly lead.
3. Insert the connector into the
device you want to power.
• The display shows the
percentage left in the power
pack.
USB ADAPTOR LEAD
This lead can be used to charge mobile phones and various USB devices.
1. Insert the lead into the USB socket
on the power pack.
2. Connect one of the connectors
on the lead to your device
• Do not connect more than one
connector at a time.
• This will supply a maximum of
2.1A at 5V.
