background image

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

4.

Store idle power tools out of the reach of children and do not allow persons 
unfamiliar with the power tool or these instructions to operate the power 
tool.

 Power tools are dangerous in the hands of untrained users.

5.

Maintain power tools. Check for misalignment or binding of moving parts, 
breakage of parts and any other condition that may affect the power tool's 
operation. If damaged, have the power tool repaired before use.

 Many 

accidents are caused by poorly maintained power tools.

6.

Keep cutting tools sharp and clean.

 Properly maintained cutting tools with 

sharp cutting edges are less likely to bind and are easier to control.

7.

Use the power tool, accessories and tool bits etc. in accordance with these 
instructions, taking into account the working conditions and the work to be 
performed. 

Use of the power tool for operations different from those 

intended could result in a hazardous situation.

SERVICE

1.

Have your power tool serviced by a qualified repair person using only 
identical replacement parts.

 This will ensure that the safety of the power 

tool is maintained.

IMPACT WRENCH SAFETY WARNINGS

1. Only use sockets designed for use with an impact wrench. Standard 

sockets could shatter and cause injury.

2. ALWAYS

 

avoid excessive use of the wrench. When tightening a nut or bolt, 

always avoid over tightening.

SAFETY SYMBOLS

The meaning of the symbol on the product is shown below.

Wear eye protection when using this product

Содержание CIR13C













Отзывы: