Thank you for purchasing this Clarke Variable Size Hole Cutting set.
Please follow these instructions carefully, in order to achieve maximum efficiency and accuracy from
the tool.
VARIABLE SIZE HOLE CUTTING SET
Model No: CHT518
Part No: 1801518
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the
date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way,
or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us
without prior permission.
This guarantee does not effect your statutory rights.
CAUTION!
•
This tool is capable of cutting round holes of diameter 40mm - 180mm (1
9
/
16
” to 7
1
/
8
”)
•
Max. depth of cut - 30mm (1
3
/
16
)
-
See Operation Instructions
•
When cutting into walls, floors or ceilings, ALWAYS check to ensure that no electric cables or water pipes etc are
in the vicinity of the proposed cut.
•
ALWAYS keep the cutting blades sharp.
•
DO NOT use undue force, or too great a drill speed (see chart on reverse).
•
Ensure the cutting blade holders are tight before use.
•
Ensure the cutting blades are the correct way round (see Fig. 1)
CAPACITY
1105
