OPERATION & MAINTENANCE
INSTRUCTIONS
ORIGINAL INSTRUCTIONS GC0221- rev 1
3 IN 1 AUTOMOTIVE PIPE BENDER
MODEL NO: CHT264
PART NO: 1801264
Страница 1: ...OPERATION MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0221 rev 1 3 IN 1 AUTOMOTIVE PIPE BENDER MODEL NO CHT264 PART NO 1801264 ...
Страница 2: ...s CLARKE Pipe Bender Before attempting to use the pipe bender it is essential that you read this manual thoroughly and carefully follow all instructions given In doing so you will ensure the safety of yourself and that of others around you and you can also look forward to the product giving you long and satisfactory service BEND LAYOUT EXAMPLE ...
Страница 3: ...roll guide for other angles less than 90deg BEND mark must be adjusted to a different alignment on roll guide see Fig 3B Note that the reference mark is below the tubing bender Holding both handles of the tubing bender draw them together with a slow steady motion to create the bend The bend is complete when the 0 mark on the roll guide is aligned with the desired angle mark on the bending die Rele...
Страница 4: ...12 months from the date of purchase Please keep your receipt as proof of purchase This guarantee is invalid if the product is found to have been abused or tampered with in any way or not used for the purpose for which it was intended Faulty goods should be returned to their place of purchase no product can be returned to us without prior permission This guarantee does not effect your statutory rig...
