Thank you for purchasing this CLARKE Universal Hub Separator.
Please read this leaflet thoroughly and follow the instructions carefully, in
doing so you will ensure the safety of yourself and that of others around you,
and you can look forward to the tool giving you long and satisfactory
service.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase. This guarantee is invalid if the product is found to have been
abused or tampered with in any way, or not used for the purpose for which
it was intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
Please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
SPARE PARTS & SERVICE
1.
Mount the adaptor plate (I) to the calliper mounting holes (1) using the
screws (J). Mount the adjusting screw (B) to the adaptor plate (I) using
screw (K).
2.
Place the forcing screw assembly (D) in the centre of the hub and lower
the yoke assembly (A) down onto the hub. Fit the adjusting screw nut
(C) to the adjusting screw (B).
3.
Fit the Honda Adaptor Plates (L) to the steering arm hole (3) using the
bolt/nut (E). Mount the yoke assembly (A) to the adaptor plates using
bolt/nut (F).
4.
Turn both forcing screw (D) and adjusting screw (C), until the yoke (A)
is parallel with the disc/hub and the forcing screw (D) is perpendicular
to the disc/hub.
Once this is accomplished, begin the turn the forcing screw to separate
the hub, paying close attention to the notes on page 4 regarding
excessive force
FOR USE WITH
HONDA ACCORD
(LATE)
AND SIMILAR HUB TYPES
2
7
