COMPONENTS
Part No.
1. Frame
ZHCHT45901
2. Threaded Post 50mm
ZHCHT45902
3. Threaded Post 90mm
ZHCHT45903
4. Adjuster
ZHCHT45904
5. Spring Holder19x16.5mm
ZHCHT45905
6. Spring Holder 23x21.5mm ZHCHT45906
7. Spring Holder 25x23.5mm ZHCHT45907
Carefully unscrew the adjuster to allow the spring to reassert, until it is loose enough
for the tool to be removed.
Parts & Service: Tel: 020 8988 7400
International, Hemnall Street, Epping, Essex CM16 4LG
Select the spring holder that most closely
fits the spring to be compressed and
slide it on to the adjuster until it locks
into place, as in 1 below.
NOTE: The holder may be fitted to the adjuster
OR the threaded post, depending upon application...design
of cylinder head etc.
Select the threaded post that allows the tool to be fitted correctly with the threaded
post bearing up against the valve head, and the spring collet positioned over the
spring as shown in 1.
Turn the adjuster to compress the spring, then prise out the collets securing the valve
as in 2, ensuring the spring holder, spring and threaded post are directly in line.
METHOD OF USE
2
1
WARNING!
ALWAYS wear
safety goggles
when using this tool
as there is always
the possibility of a
flying spring.
COMPONENTS
Part No.
1. Frame
ZHCHT45901
2. Threaded Post 50mm
ZHCHT45902
3. Threaded Post 90mm
ZHCHT45903
4. Adjuster
ZHCHT45904
5. Spring Holder19x16.5mm
ZHCHT45905
6. Spring Holder 23x21.5mm ZHCHT45906
7. Spring Holder 25x23.5mm ZHCHT45907
Carefully unscrew the adjuster to allow the spring to reassert, until it is loose enough
for the tool to be removed.
Parts & Service: Tel: 020 8988 7400
International, Hemnall Street, Epping, Essex CM16 4LG
Select the spring holder that most closely
fits the spring to be compressed and
slide it on to the adjuster until it locks
into place, as in 1 below.
NOTE: The holder may be fitted to the adjuster
OR the threaded post, depending upon application...design
of cylinder head etc.
Select the threaded post that allows the tool to be fitted correctly with the threaded
post bearing up against the valve head, and the spring collet positioned over the
spring as shown in 1.
Turn the adjuster to compress the spring, then prise out the collets securing the valve
as in 2, ensuring the spring holder, spring and threaded post are directly in line.
METHOD OF USE
2
1
WARNING!
ALWAYS wear
safety goggles
when using this tool
as there is always
the possibility of a
flying spring.
