9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE AND SERVICING
STORAGE
1. Make sure that the impact wrench is stored in a clean, dry place, out of
reach of children when not in use.
2. Always store the impact wrench and its sockets in the case supplied.
CLEANING
1. Always examine the tool before use and make sure that it is in good
condition.
2. Make sure that all air vents are clear, (use compressed air to clean the
impact wrench if possible).
3. Do not use solvents to clean plastic parts, most plastics are damaged by
solvents.
GENERAL MAINTENANCE
1. Make sure that all nuts, bolts and screws are tight.
2. Refer to your CLARKE dealer if internal rnaintenance is necessary .
3. Make sure that the power cable is free from cracks, bare wires etc .
4. If it is necessary to replace the power cable, this must be done by the
manufacturer.
5. The bearings in this tool are lubricated for the tools lifetime in usual
operating conditions, no more lubrication is necessary.
ENVIRONMENTAL PROTECTION
Through purchase of this tool, the customer is taking on the obligation
to deal with the WEEE in accordance with the WEEE regulations in
relation to the treatment, recycling & recovery and environmentally
sound disposal of the WEEE.
In effect, this means that this tool must not be discarded with general waste.
Refer to the laws governing Waste Electrical and Electronic Equipment (WEEE)
at a recognised disposal facility.
Содержание CEW1100
Страница 12: ......
