Clarke CEC500DS, Инструкции по обслуживанию пользователя

Страница: 3 / 8

3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
GENERAL SAFETY RULES
Before using your engine support, it is in your own interest to read and comply
with the following safety rules.
1. Keep the work area clean. Cluttered areas invite injuries. Keep the work
area well lit.
2. Keep children away. Children must never be allowed in the work area.
3. Store idle equipment. When not in use, tools must be locked up in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
4. Dress properly. Do not wear loose clothing or jewelry which could be
caught in moving parts.
5. Use eye and hand protection. Always wear approved impact safety
goggles.
6. Watch what you are doing and use common sense. Do not use any tool
when you are tired.
7. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function.
8. Do not use this equipment if under the influence of alcohol or drugs. If there
is any doubt, do not operate the tool.
9. Always keep bystanders well clear.
10. Never exceed the safe working load of 500 kg.
11. Use only slings or chains with a capacity equal to, or greater than that of
the engine support.
12. Ensure the operator is familiar with both operational and safety aspects.
13. Before supporting a load, ensure all bolts and lock knobs are fully
tightened.
14. Always check to ensure that any sling or chain used is properly secured
and that it cannot cause damage to engine components as the weight is
taken by the engine support.
15. Inspect the engine support before use to ensure it is in good condition.
Replace any damaged or worn parts.
16. If replacing parts, only use those supplied by Clarke International.