Clarke CDM95, Инструкция по эксплуатации и техническому обслуживанию

Страница: 14 / 24

14
NOTE:
• At a low voltage range, unsteady readings may appear before
the test leads touch the circuit. This is normal because the meter is
highly sensitive. When the test leads contact the circuit, the true
reading will be shown.
• If OL is displayed when in manual mode, the measurement has
exceeded the selected range and a higher one should be
selected.
• In the Manual Range mode, when the value to be measured is not
known, select the highest range first and lower the range gradually.
• The maximum permitted input voltage for the meter is 600V rms
AC.