Clarke CCRT266 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 16

Clarke CCRT266 Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this cordless rotary tool kit.

Please read this manual thoroughly, before attempting to operate, and carefully follow
all instructions given.

It is vitally important that ALL precautions are taken, as specified, which will not only
provide protection for yourself and that of others around you, but will also ensure that
the product will give you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with
in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.

This guarantee does not effect your statutory rights.

SPECIFICATIONS

Operating Voltage:

9.6 V-DC

Battery charge time

3 Hours

No-Load Speed

8000-20000 rpm

Collet Capacity

1 x 1/16”
1 x 3/32”
2 x 1/8” (3.175 mm)

Sound Pressure Level LpA

88.5 dB

Sound Power Level LWA

99.5 dB

Vibration

Less than 2.5 m/s

2

Dimensions (L x W x H)

235 x 60 x 45 mm

Weight (kg)

1.7 kg

Part Number

6461901

«
1
2
3
4
...
»

Содержание CCRT266

















Отзывы:

Нет отзывов