Clarke CBSS1 Скачать руководство пользователя страница 3

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

SAFETY PRECAUTIONS

1. Always read the instructions before installing.

2. Clarke International is not responsible for any damage resulting from 

improper installation or overloading.

3. Suitable for indoor, non-industrial use only.

4. Before using the lift, make sure that it has been installed correctly and is 

operating properly.

5. This product is designed to be used by an able bodied, competent adult 

who has read and understood these instructions.

6. Never use undue effort to force the lift to operate. If resistance is felt, 

investigate the cause.

7. Ensure that the ceiling joist is in good condition and suitably strong to 

support the mounting subject to max load.

8. Keep children, animals and bystanders away from the lifting area.

9. Before use, always inspect the bicycle lift and its mountings to ensure they 

are in good condition. If any damaged or broken parts are found, the 
equipment should be removed from service and the parts renewed or 
repaired before further use.

10. This bicycle lift system is mainly intended for lifting bicycles but can safely 

be used for storing other items such as ladders.

11. Ensure that the weight of the load to be lifted is within the safe rated load 

of this product.

12. Never lift the load at a sideways angle.

IMPORTANT: Safe Working Load 45 kg.

Содержание CBSS1









Отзывы: