6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
DRIP RATE CHART
MAINTENANCE
DISASSEMBLY
1. The lubricator can be disassembled without removal from air line.
2. Shut off the inlet pressure. Reduce pressure in inlet and outlet lines to zero.
3. Remove the bowl by turning anti-clockwise.
4. Do not remove the drain valve unless replacement is necessary. Remove
and replace only if the drain malfunctions. Remove and replace cartridge
assembly only if lubricator malfunctions.
CLEANING
1. Clean the plastic bowl with warm water only. Clean other parts with warm
water and soap.
2. Rinse and dry all parts. Blow out internal passages in the body with clean,
dry, compressed air.
3. Inspect all parts. Replace any found to be damaged. Replace the plastic
bowl with a metal bowl if plastic bowl shows signs of cracking or cloudiness.
ASSEMBLY
1. Assemble as shown on page 7 using the torque values listed in the table.
Lubricate all o-rings with o-ring grease.
Flow (CFM)
Drops per minute
Flow (CFM
Drops per minute
0.5
4
6
16
1
5
7
19
2
8
8
21
3
10
9
23
4
12
10
25
5
14
Torque Settings
Part
Inch Pounds (Nm)
Drain
1.5 to 2.5 (0.17 to 0.28)
Bowl
5 to 10 (0.56 to 1.13)
Dome
20 to 25 (2.3 to 2.8)
Содержание CAT194
Страница 8: ......
