6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CARE AND MAINTENANCE
A build-up of moisture in the air compressor will accelerate wear and corrosion
in airline tools. Ensure any moisture is drained from the compressor routinely
and that any in-line filter is kept clean.
The filter bowl will require draining by
manually pulling the valve open.
Ensure the water level always remains
below the baffle inside the bowl.
With use, the filter will become
sufficiently blocked that the air
throughput can become severely
diminished. It should be removed and
cleaned as follows:
1. Shut off the air compressor and
vent any remaining air from the
airline.
2. Remove the outer bowl cover by
pulling the spring loaded catch
down, then push up and twist the bowl 45 deg, before pulling the bowl
from the body (against any frictional resistance from the O-ring).
3. Gently clean the filter and body
using dishwashing liquid and allow
to dry before re-assembly. Blow
out internal passages in the body
with compressed air.
Your filter/regulator has been
designed to give long and trouble
free service. If, however, having
followed the instructions in this booklet
carefully, you encounter problems,
take the unit to your local CLARKE
dealer.
Содержание CAT161
Страница 8: ......
