Clarke APA240, Инструкция по эксплуатации и техническому обслуживанию, Страница: 14 / 24

14
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
REMOTE CONTROL OPERATION
All the controls on the machine
control panel are replicated on the
remote control unit with the addition
of the Auto-Mode (J). Press this
button to select AUTO-MODE.
When the Air Quality indicator
flashes, the filters are becoming
blocked and need replacement.
(See Maintenance on pages 17-19).
After replacing all the filters, press the
RESET button (K) on the remote
control for 2- seconds and the filter
service interval time will be re-set.
OPERATING MODES
When the appliance is first plugged in, you will hear a beep, indicating that
the appliance is operating normally.
If required, set the appliance running at high speed for fast initial cleaning of
the air before adjusting the control to a slower speed.
NORMAL OPERATING MODE
When the appliance is on, it will enter the NORMAL operating mode by
default. Press the fan speed button (H, M, L, SILENT) as required. The operating
status will be as follows:
• Press the fan speed button to adjust the fan speed as required, the
related fan speed light will be on.
• The Plasma filter will be operating by default. Press the ‘PLASMA’ button
to set the plasma filter on or off.
• The Air Quality indicator will be on by default. Press the ‘AIR QUALITY’
button to set the Air Quality indicator on or off.
AUTO MODE
Set the appliance in Auto mode by using the ‘AUTO’ button in the remote
control.
• The high, mid, or low fan speed indicator will all flash in turn, showing that
the appliance is running in AUTO mode.