Clarke
®
American Sanders
Super 7R Operator's Manual
Page 3
DANGER
means:
Severe bodily injury or death can occur to you or other personnel if the
DAN-
GER
statements found on this machine or in this Owner's Manual are ignored
or are not adhered to. Read and observe all
DANGER
statements found in this
Owner's Manual and on your machine.
WARNING
means:
Injury can occur to you or to other personnel if the
WARNING
statements
found on your machine or in this Owner's Manual are ignored or are not
adhered to. Read and observe all
WARNING
statements found in this Owner's
Manual and on your machine.
CAUTION
means:
Damage can occur to the machine or to other property if the
CAUTION
state-
ments found on your machine or in this Owner's Manual are ignored or are not
adhered to. Read and observe all
CAUTION
statements found in this Owner's
Manual and on your machine.
DANGER:
Failure to read the Owner's Manual prior to operating or attempting any service or mainte-
nance procedure to your Clarke American Sanders machine could result in injury to you or
to other personnel; damage to the machine or to other property could occur as well. You
must have training in the operation of this machine before using it.
If you cannot read
English, have this manual explained fully before attempting to operate this ma-
chine.
DANGER
:
Sanding/finishing wood floors can create an environment that can be explosive. The
following safety procedures must be adhered to:
• Cigarette lighters, pilot lights and any other source of ignition can create an explosion
when active during a sanding session. All sources of ignition should be extinguished or
removed entirely if possible from the work area.
• Work areas that are poorly ventilated can create an explosive environment when certain
combustible materials are in the atmosphere, i.e., solvents, thinners, alcohol, fuels,
certain finishes, wood dust and other combustible materials. Floor sanding machines
can cause flammable material and vapors to burn. Read the manufacturer's label on all
chemicals used to determine combustibility. Keep the work area well ventilated.
• Spontaneous combustion or an explosion can occur when working with sanding dust.
The sanding dust can ignite and cause injury or damage. Sanding dust should be
disposed of properly. Always empty the sanding dust into a metal container that is
located outside of any building(s).
• Remove the contents of the dust bag when the bag is 1/3 full. Remove the contents of
the dust bag each time you finish using the machine. Never leave a dust bag unattended
with sanding dust in it.
• Do not empty the contents of the dust bag into a fire.
• Hitting a nail while sanding can cause sparks and create an explosion or fire. Always
use a hammer and punch to countersink all nails before sanding floors.
DANGER:
Operating a machine that is not completely or fully assembled could result in injury or
property damage. Do not operate this machine until it is completely assembled. Keep
all fasteners tight. Keep adjustments according to machine specifications.
WARNING
AVERTISSEMENT
ADVERTENCIA
OPERATOR SAFETY INSTRUCTIONS
