11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5. Move the choke to the ‘START’
position.
NOTE:
Not required if the engine is
already warm.
6. Hold the generator steady and
pull the starting handle lightly until
you start to feel resistance.
Then pull sharply to start the
engine.
NOTE:
You may have to do this
more than once.
NOTE:
When you first start the generator, the overload indicator may light
up for a few seconds, which is normal. If the overload indicator is
still lit after 5 seconds, stop the engine and contact your Clarke
dealer.
7. Once the engine has warmed up,
move the choke to the “run”
position.
WARNING: ONCE THE GENERATOR HAS STARTED, RELEASE THE STARTING
HANDLE SLOWLY TO AVOID INJURY/DAMAGE AS IT RECOILS.
Содержание 8877095
Страница 28: ......