Clarke 7630925 Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for selecting this CLARKE Parts Washer. The CWM20 is ideal for 
garage/workshop use when cleaning smaller automotive and machinery 
components.

Before using the product, be sure to read these instructions thoroughly. In 
doing so you will ensure the safety of yourself and of others around you, and 
you can look forward to the product giving you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 
12 months from the date of purchase. Please keep your receipt as proof of 
purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

SPECIFICATIONS & FEATURES

• Accepts all common degreasing fluids.

• Fusible link automatically closes lid in case of fire.

• Easy maintenance solvent pump.

• Built-in replacable filter

• Easy maintenance solvent pump

Motor:

230V, 1ph, 50Hz

Maximum Pump Capacity

90 L/hour

Tank Capacity

60 L / 16 Gal

Weigh carrying capacity

50 Kg

Dimensions (L x W x H)

985 x 540 x 930 mm (Lid Closed)
985 x 540 x 1410 mm (Lid Open)

Weight:

33 kg

Содержание 7630925













Отзывы: