Clarke 7624007, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 12

7
2. Remove the jack from below the vehicle.
NOTE: The jack can move slightly during operation. It is important that
the area is clean and free from all debris.
MAINTENANCE
1. Remove any corrosion and repaint for protection.
2. Check the piston rod periodically for signs of corrosion. Clean exposed
areas with a clean oiled cloth.
3. Ensure that labels and warning notices are in place and legible.
4. Inspect for distortion of hinge pins and security of all nuts and bolts.
5. Keep all moving parts lightly lubricated to prevent any possibility of
corrosion.
• A grease nipple is provided for occasional lubrication of the main
supporting axle.
6. If an oil leak is seen, check the oil level as described on page 5.
7. In the case of a persistant oil leak which requires the dismantling of the
hydraulic parts to correct, the jack should be taken to your Clarke dealer
for overhaul.
STORAGE
Store in a dry place with the ram fully lowered and the release valve closed.
If stored for long periods, inspect at least once a year, clean and re-oil. For
servicing, contact your CLARKE dealer, or CLARKE International Service
Department.