background image

2

INTRODUCTION

Thank you for purchasing this CLARKE Garage Jack.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

SPECIFICATIONS

Model number

CTJ2500QLP

Weight

30.5kg

Dimensions (L x W x H) without handle

730 x 345  x 152mm

Cup diameter

110 mm

Rated Load

2.5 tonne (2500kg)

Height of saddle from floor (minimum)

80 mm

Height of saddle from floor (maximum)

510 mm

Pump oil capacity

0.24L

Number of strokes min-max height

7

Distance per stroke

75 mm

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. This guarantee does not effect your 
statutory rights.

Содержание 7621804













Отзывы: