Clarke 7620052 Скачать руководство пользователя страница 3

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

SAFETY PRECAUTIONS

1. DO NOT exceed the rated capacity of the jack.

2. DO NOT let anyone operate the jack unless they have read these safety 

precautions.

3. DO NOT operate the jack if damaged in any way.

4. Use the jack in a well lit work area.

5. Keep the work area clean and tidy and free from unrelated items.

6. Only use the jack on level and solid ground, preferably concrete. Never 

use it on soft/unmade ground as the jack may sink in.

7. Make sure that non-essential persons keep a safe distance whilst the jack is 

in use.

8. Make sure there are no people or obstructions under the vehicle before 

lowering.

9. DO NOT work below the vehicle until it is fully supported by axle stands.

10. Keep your hands clear of the vehicle until lifting is complete.

11. Make sure that you can see the saddle and jacking point throughout the 

jacking operation in case there is any relative movement.

12. ALWAYS make sure that the jack saddle is centred and stable on the lifting 

point before lifting and position the jack to avoid operating it from under 
the vehicle.

13. Check the vehicle weight and location of the lifting points by referring to 

the vehicle owners manual.

14. DO NOT tamper with the jack or modify it in any way, as this could prove to 

be dangerous and will invalidate the guarantee. 

15. Only use the jack for the purpose for which it is intended.

16. Use applicable safety equipment, such as protective footwear, when you 

use this jack.

17. Make sure that the jack is correctly maintained and lubricated at all times, 

and that no corrosion is allowed to weaken any part of it.

18. If the jack has been subjected to an abnormal load or shock, it should be 

removed from service immediately and fully inspected by qualified 
personnel, and passed as serviceable, before being used again.

19. When not in use, store the jack, fully lowered, in a safe, dry, childproof area.

Содержание 7620052













Отзывы: