17
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5. Fill the priming bottle with water.
6. Connect the hose from the bottle
to the self-suction valve shown.
7. Place the filter into the water
source and start the pressure
washer, See “Starting your
pressure washer” on page 11.
8. Release the exhaust valve.
9. Turn the self-suction valve to the
on position.
10. Release the trigger lock and pull
the trigger.
11. When the water spray is at high
pressure, close the exhaust valve
and set the suction valve to the
OFF position.
NOTE:
If the water butt runs out of
water, the pressure washer will
need to be primed before use
by repeating steps 4-10.
Содержание 7320212
Страница 28: ......