11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING DETERGENT
1. Slide the nozzle forward for low
pressure operation.
2. Pull the trigger to spray the
detergent.
• The detergent can ONLY be
sprayed when the nozzle is in
low pressure mode.
SWITCHING OFF
1. Press (0) on the burner switch
2. Press (0) on the master switch
3. Pull the trigger and wait until the
unpressurised water goes
completely cold.
• In this way you avoid any
calcium deposit and
overheating of the coil and the
boiler.
4. Remove the plug from the power supply.
5. Release any pressure in the hose by pulling the trigger.
6. Engage the trigger lock.
CAUTION: IF YOUR EYES COME INTO CONTACT WITH ANY CLEANING
FLUIDS, RINSE THEM IMMEDIATELY WITH PLENTY OF CLEAN WATER AND
SEEK MEDICAL ADVICE IF REQUIRED.
