Clarke 7230695 Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE 400W Submersible pump with folding 
base and float switch.

This pump is designed for pumping clean water and water containing solid 
bodies (max 30mm in diameter). 

It is NOT designed for pumping slurry, sludge, 

mud or heavily polluted water, or any water containing chemicals or other 
acidic contaminants including salt water.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the 
obligation to deal with the WEEE in accordance with the WEEE 
regulations in relation to the treatment, recycling & recovery and 
environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general 
household waste. It must be disposed of according to the laws governing 
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal 
facility.

OVERLOAD SWITCH

These pumps are fitted with a thermal overload switch. If the pump overheats 
for any reason, it will automatically switch the pump OFF. Once the pump has 
cooled (at least 5-10 minutes), the pump will automatically restart.

Содержание 7230695













Отзывы: