Clarke 7230650, Инструкция по эксплуатации и обслуживанию, Страница: 4 / 16

4
PUMP SAFETY PRECAUTIONS
1. Only use the pump in the manner described in these instructions.
2. These pumps are designed to pump water only. Never use for pumping
flammable liquids or corrosive chemicals of any kind.
3. An approved Residual Current Device (RCD) must be used when pumping
from ponds or swimming pools.
4. Always disconnect the pump from the electrical supply before any
cleaning or maintenance.
5. REMEMBER...the operator or user is responsible for accidents or hazards
occurring to other people or their property.
6. If the electrical cable becomes damaged, it must be replaced- not
repaired.
7. Keep the work area well lit. Dark areas invite accidents.
8. Do not over-reach. Keep your proper footing and balance at all times
when handling the pump in waterlogged areas.
9. Store the pump out of the reach of children and do not allow persons
unfamiliar with these instructions to operate the pump.
10. Do not abuse the electrical cable. Never use the cable for pulling or
unplugging the pump Damaged or tangled cables increase the risk of
electric shock.
11. Check the pump for damage before use. Any damaged part should be
inspected to ensure that it will operate properly and perform its intended
function. Any damage should be properly repaired or the part replaced.
If in doubt, DO NOT use. Consult your local dealer.
12. When operating outdoors, use an extension cable suitable for outdoor
use. Using the correct cable reduces the risk of electric shock.
13. Always use an approved cable extension suitable for the power rating of
this pump (see specifications), the conductor size should also be at least
the same size as that on the pump, or larger. When using a cable reel,
always unwind the cable completely.
14. Keep children and bystanders away while operating the pump.
Additionally, please keep these instructions in a safe place for future reference.